移动式油泥高速铣削测量系统采购项目国际招标澄清或变更(1)

广西招标采购网   2019-05-22
利记彩票|

移动式油泥高速铣削测量系统采购项目国际招标澄清或变更(1)

 

澄清或变更简要说明:投标截止时间(开标时间)变更为2019-06-14 10:00北京时间

广西机电设备招标有限公司受招标人委托对下列产品及服务进行国际公开竞争性招标,于2019-05-22在中国国际招标网发布变更公告 本次招标采用传统招标方式,现邀请合格投标人参加投标

1招标条件

项目概况:本招标项目为移动式油泥高速铣削测量系统采购项目,招标人为上汽通用五菱汽车股份有限公司,建设资金为招标人自筹。项目资金已经落实,已具备招标条件,现对该项目下列货物和有关服务进行国际公开招标。

资金到位或资金来源落实情况:项目资金已经落实

项目已具备招标条件的说明:已具备招标条件

2招标内容

招标项目编号0633-194012118638

招标项目名称:移动式油泥高速铣削测量系统采购项目

项目实施地点:中国广西壮族自治区柳州市

招标产品列表(主要设备):移动式油泥高速铣削测量系统1套,详见招标文件

3投标人资格要求

投标人应具备的资格或业绩:投标人必须是制造商或制造商唯一授权的代理商,在招标机构登记并购买了招标文件,并已在机电产品招标投标电子交易平台成功注册。投标人应有给至少3家国际或国内整车厂研发部门提供同类产品的产品经验。投标人在中国境内有售后服务机构及维修能力(投标方须提供维修人员资质和维修地点)。设备制造商必须通过质量体系ISO9001ISO14001系列认证。投标人须在投标书中提供在用同类型设备的客户资料,提供的资料应具备如下信息

用户名称

所在国家

设备型号

设备数量

投入使用日期

设备结构

铣削范围

合同封面

复印件

制造方

授权书

是否接受联合体投标:不接受

未领购招标文件是否可以参加投标:不可以

4招标文件的获取

招标文件领购开始时间2019515

招标文件领购结束时间2019522

获取招标文件方式:现场领购

招标文件领购地点:本项目只发售电子版招标文件,请潜在投标人于本招标公告有效期限内,即201951583000秒起至2019522180000秒止,登录精彩纵横电子交易平台www.jczh100.com在线支付后下载招标文件

招标文件售价:¥600 / $100

5投标文件的递交

投标截止时间(开标时间):201961410:00北京时间

投标文件送达地点:广西机电设备招标有限公司柳州分公司(广西柳州市东环大道230号居上V8A191912号开标室

开标地点:广西机电设备招标有限公司柳州分公司(广西柳州市东环大道230号居上V8A191912号开标室

6投标人在投标前应在必联网http://www.ebnew.com或机电产品招标投标电子交易平台http://www.chinabidding.com完成注册及信息核验。评标结果将在必联网和中国国际招标网公示

7联系方式

招标人:上汽通用五菱汽车股份有限公司

地址:广西柳州市河西路18

联系人:周显军

联系方式 :(07722658613

招标代理机构:广西机电设备招标有限公司

地址:广西南宁市金湖路63号金源CBD现代城7层(530021

联系人:廖俐娜、黄涛平

联系方式 0771-2833821 传真0771-2830802

电子邮件dept1@gxbidding.cn

8汇款方式

9其他补充说明

机电产品招标投标电子交易平台www.chinabidding.com)为国家商务部指定的全国机电产品国际招标投标活动公共服务平台和行政监督平台,注册事宜请联系机电产品招标投标电子交易平台,相关要求详见《机电产品国际招标投标实施办法》。

 

 

Mobile High Speed Clay Milling and Measuring System procurement project(1)

Clarify or changeDeadline for Submitting Bids/Time of Bid Opening (Beijing Time)2019-06-14 10:00

Guangxi Machinery & Electric Equipment Tendering Co.,Ltd entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on www.chinabidding.com on 2019-05-22.

1. Bidding Conditions

Overview: SAIC-GM-Wuling Automobile Corporation Ltd. invites sealed bids from eligible suppliers of Mobile High Speed Clay Milling and Measuring System by the way of international competitive bidding, and the project’s fund has been confirmed.

Source of Funds: The project’s fund has been confirmed.

Description of The Prepared Bidding Conditions: The project’s fund has been confirmed.

2. Bidding Content

Bidding No: 0633-194012118638

Project Name: Mobile High Speed Clay Milling and Measuring System procurement project

Place of Implementation: Liuzhou, Guangxi, P.R.China

List of Products: Mobile High Speed Clay Milling and Measuring System 1set. For technical specifications details, see the bidding documents.

3. Qualification Requirements for Bidder

Qualifications or Performance

Bidder must be the manufacturer or manufacturer directly authorized agents to participate in the bidding, has been successfully registered at www.chinabidding.com, and in the tender registration and purchase of tender documents.The bidder shall have experience in providing products of similar products to at least 3 international or domestic OEM R&D departments. The bidder has an after-sales service organization and maintenance capability in China. (The bidder must provide the qualification of the maintenance personnel and the location of the repair). Equipment manufacturers must pass quality system ISO9001 and ISO14001 series certification. The bidder is requested to provide the customer information of the same type of equipment in the bid, and the information provided should have the following information:

Name

Country

Type

Quantity

Date of use

structure

Milling range

Copy of the contract cover

Manufacturer's authorization

Joint Bids: NOT Available

Bid without the bidding documents: NOT Available

4. Acquisition of Bidding Documents

Beginning of Selling Bidding Documents: 2019-05-15

Ending of Selling Bidding Documents: 2019-05-22

To Obtain: On-site Purchase

Place: project only offer electronic tender documents, please invite potential bidders in this bidding announcement valid period, that is, 2019-05-15 08:30:00 until 2019-05-22 18:00:00 stop, login (www.jczh100.com) downloading bidding documents after online payment.

Price of Bidding Documents: 600/$100

5. Bid Submission

Deadline for Submitting Bids/Time of Bid Opening (Beijing Time): 2019-06-14 10:00

Place of Bid: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

Place of Bid Opening: Liuzhou Branch, Guangxi Machinery and Electric Equipment Tendering Co., Ltd.( Address: 1912,19F, Block A, Jushang V8 Building, No. 230, Donghuan Avenue, Liuzhou, Guangxi)

6. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com..

7. Contact Details

Purchasers: Saic GM Wuling Automobile Co., Ltd

Add.: No.18, Hexi Road, Liuzhou, Guangxi, P.R.China

Contact: Mr. Zhou Xianjun

Tel.: 07722658613

Bidding Agency: Guangxi Machinery and Electric Equipment Tendering Co., Ltd

Add.: 7/F, Jinyuan CBD Building, No.63, Jinhu Road, Nanning, Guangxi, P.R.China

Contact: Ms. Liao LinaMr.Huang Taoping

Tel.: (0086)0771-2833821 Fax: (0086)771-2830802

Email:dept1@gxbidding.cn

8. Remittance Approach

9. Additional Instructions

China international tendering (www.chinabidding.com) for International Tendering and bidding of mechanical and electrical products nationwide designated by the State Department of Commerce and public service platform administrative supervision platform, registration please contact Chinese International Tendering requirements, refer to "mechanical and electrical products in the international bidding implementation measures" implementation.